Correct Operating Method of Pneumatic Tools


Because many customers do not know what the correct use of pneumatic tools is after purchasing them, so today to explain the correct operation of pneumatic tools, we only master the correct use of methods, in order to increase our work efficiency and extend the service life of tools. Pneumatic tools are also chosen as auxiliary tools because they can reduce the pressure of our work.
Firstly, when operating pneumatic tools, the first factor that needs to be noticed is to determine that the selected air supply system is appropriate and correct. Generally speaking, when there are some intake pressure at the inlet of the pneumatic tool, and these intake pressure is not the pressure from the air compressor, then the pressure of these air is generally around 90. Xiaobian needs to remind you that if the intake pressure is very high or very low, it will directly lead to the reduction of the service life of pneumatic tools and the performance of pneumatic tools will be reduced. Therefore, when using pneumatic tools, it is necessary to determine the appropriate intake pressure, if not appropriate. Adjustments need to be made in the first place.

Secondly, when the pneumatic tool is in the air intake operation, we need to ensure that there is enough lubricant inside the pneumatic tool, so that when the pneumatic tool is in the air intake operation, the motor installed in the tool will be fully lubricated. At the same time, we can also place a piece of white paper at the exhaust pipe position of the pneumatic tool. If there is no oil stain on the white paper, then we can conclude that the exhaust system of the pneumatic tool is not very good, because in general, when the pneumatic tool is exhausted, some will be discharged. Oil stained.
Third, we also need to ensure that the air in the pneumatic tool intake operation does not contain any moisture, which will directly reduce the service life and performance of the pneumatic tool.