1.The air is easy to obtain and the working pressure is low. The used air can be discharged on the spot without the need to recycle the pipe 2. The viscosity of the gas is small, the flow resistance loss is small, and it is convenient for centralized gas supply and long-distance transmission. 3. Pneumatic actuator has high moving speed 4. Pneumatic The system's adaptability to the environment is strong, it can work reliably in a wide range of temperature, humidity and dusty environment, slight leakage will not pollute the environment, no risk of fire and explosion, use safety 5. Simple structure, convenient maintenance and low cost 6. Long life of pneumatic components 7. The output of pneumatic components is smaller than hydraulic pressure, fast movement, and strong adaptability. It can work in the harsh environment of flammable, explosive, dusty, damp, and impact. It does not pollute the environment and has a long working life. Simple structure, easy maintenance, low price.
Confucius said: "If workers want to do good things, they must first sharpen their tools." To complete each processing or assembly task, we must first equip appropriate and excellent tools. Hardware tools cannot be used without maintenance, which will reduce the service life of hardware tools. We are talking about the use and maintenance of pneumatic screwdrivers in pneumatic tools. Pneumatic tools are mainly used for tightening and assembly. Automobile manufacturing, electronics, home appliances, auto parts production, equipment maintenance, and aerospace are the main industries for their application. Precision, reliability, and durability are the functional metrics for pneumatic tools. The quality of rotating pneumatic tools depends on six aspects: 1. The performance of the built-in pneumatic motor (rotary power); 2. The metal materials and processing methods used for the transmission components; 3. The precision of the parts and the assembly precision of the tools; 4. The tools Design, production innovation, optimization, improvement; 5. Quality control; 6. Correct and reasonable use.
1. The correct generation of gas supply system: inlet pressure at the inlet of the tool (non-air compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2), too high, too low are detrimental to the performance and life of the tool . The intake air must contain sufficient lubricant so that the air motor in the tool is sufficiently lubricated (place a white paper on the tool exhaust to see if there is oil, normally it is oily). The intake air must not contain moisture, and it is not appropriate if the air is not air-dried. 2. It is not allowed to dismantle the parts of the tool and operate it. It will affect the safety of the operator and cause the tool to be damaged. If the tool is slightly faulty or cannot be used after it has been used, it cannot be used anymore. Check it immediately. 4. Periodically (about once a week) Check and maintain the tool, add Grease to the bearing and other rotating parts, and add oil to the air motor. 5. Use all kinds of tools, be sure to follow various safety regulations and instructions for use. 6. To use appropriate tools to work, tools that are too large are prone to work injuries, and tools that are too small can easily damage the tool.